Vertical Machining Center – Software Optimized
The Spindle in the SIRIUS-7040 vertical machining center is handcrafted for extra machining speed and precision. The spindle is grease-lubricated for long life, the motor is coupled directly and no drive line means there is no power lost. The spindle temperature is controlled by a Jacket Circulation cooling system for the highest spindle precision and thermal stability. The feed system is equipped with a highly rigid roller guide for enhanced precision during machining, and the Y axis implements 4-way roller guides to provide the best support stability for work piece and precision control during contouring.
Travel: 59.06″ x 27.56″ x 25.59″
Table Size: 62.99″ x 27.56″
Spindles: BT/CAT40 – 10,000 RPM
Tool Capacity: 30
Super Rigid Roughing and Ultra-Precise Finishing Performance
Each spindle in SIRIUS-7040/7050 vertical machining centers is handcrafted for extra machining speed and precision. The spindle is grease-lubricated for long life, the motor is coupled directly and no drive line means there are no power lost. The spindle temperature is controlled by Jacket Circulation cooling system for highest spindle precision and thermal stability. The feed system is equipped with highly rigid roller guide for enhanced precision during machining and the Y axis implements 4-way roller guide to provide best support stability for work piece and precision control during contouring. The software components constantly monitor the variables in different work environments and machining conditions and make necessary adjustments in real time to give you best quality result every time.
700mm Y-axis vertical machining centers that’s optimized to perform with Hwacheon’s advanced software
The Hwacheon made grease lubricated spindle increases machining efficiency, the machines are optimized to work with software components made by Hwacheon’s extensive industry experience and know-how, for efficient and precise machining. The Y axis is equipped with highly rigid 4-way roller guide to provide maximum control during 3D contour machining.
4-Guide Box Way Design
To limit friction and to increase accurate table feed, Linear Roller design has been used to all axes. The Y-axis slide has four guide way which are widened to enhance the support capacity and decrease the area of friction, while limiting yawing that can occur from a wide slide way.
Advanced Spindle Performance
Hwacheon’s advanced spindles in SIRIUS-7040/7050 vertical machining centers are motor coupled for high-speed machining stability, and grease lubrication the Jacket Circulation cooling technology provide maximum thermal stability.
Hwacheon’s Jacket Cooling Technology
The cooling oil is circulating around the motor frame and the bearing housing for most effective cooling.
Hwacheon Machining Software Components
The Hwacheon’s developed machining software monitors different variables related to the work environment and machining conditions and makes adjustments for best quality results and optimum work efficiency.
|Spindle Gauge Plane to Table Top||5.9″ – 31.5″|
|Dimensions||62.99″ x 27.56″|
|Max Load||25,353 lbs|
|T-Slots||7 x 0.71″ x 3.93″|
|Spindle Speed||10,000 RPM|
|Spindle Power||20 HP|
|Rapid Traverse (X/Y/Z)||1,181/1,181/1,181 ipm|
|Max. Tool Diameter||3.35″/6.69″|
|Max. Tool Length||11.81″|
|Air Pressure||5-7 CFM|
|Power Consumption||40 kVA|
|Machine Weight||25,353 lbs|
|Operating Dimensions||148.82″ x 120.08″ x 121.26″|