Vertical Machining Center – Twin Spindle
VESTA 500T offers the most optimal production speed and highest quality for processing small parts through independent bilateral symmetry Z-Axis twin spindle structure that was produced with the technology of Hwacheon. Hwacheon’s own technologies such as the most optimal high-speed feeding and precision enhancement software (HTDC, HAI) were applied.
Twin Magazines for high productivity – Cycle time minimized by operating on each of the two main spindles independently.
High-Speed and High-Rigidity Spindles – Optimized for mass production of small workpieces.
Structural Design – With the bilateral symmetry structure, unintended modification such as distortion is minimized. Independent compensation/control is offer with the independent Z-Axis design. High-speed feeding through optimization of acceleration and deceleration system is offered.
|Spindle Gauge Plane to Table Top||5.91″ – 20.87″|
|Dimensions||28.35″ x 15.75″|
|Max Load||440 lbs|
|T-Slots||3 x 0.55″ x 4.92″|
|Spindle Motor & Speed||BBT30 – 24,000 RPM (2)|
|Spindle Power||14.7 HP|
|Rapid Traverse (X/Y/Z/W)||2,362 ipm|
|Capacity||24 Tools (2)|
|Max. Tool Diameter||3.15″|
|Max. Tool Length||7.87″|
|Air Pressure||5 CFM|
|Power Consumption||42 KVA|
|Machine Weight||14,771 lbs|
|Operating Dimensions||127.01″ x 131.38″ x 90.94″|