Vertical Machining Center – Dual Table
The VESTA-610D doesn’t miss even the smallest detail to ensure top performance. It is equipped with a standard dual table for maximum operating efficiency and a compact size to facilitate automation in support of a variety of automated systems. HTLD increases the life of your tools; HECC provides perfect contour control for better machining efficiency; OPTIMA controls the feed-rate and HTLD adjusts the temperature in real time. To minimize thermal displacement and to increase the life of the spindle assembly, the spindle unit is grease-lubricated and jacket cooled. The advanced feed drive complements the spindle for highly precise machining results every time. The super tough roller guide maintains precision even at high speeds.
Travel: 24.02″ x 16.93″ x 22.44″
Table Size: 33.46″ x 19.69″
Spindles: BT/CAT40 -10,000 RPM
Tool Capacity: 24
A dual-table vertical machining center for efficient mass production.
The high speed dual tables maximizes machining time; and the powerful clamping force of the tables curvic coupling allows for stability during hard cutting, which translates to consistent product quality and precision.
The high-speed dual tables in VESTA-610D take only six seconds for the table index.
One table can be loaded with a work piece while the other is at work.The high-power clamping and the rigid frame guarantee continued precision after repeated operations to give you consistent product quality every time. The tables are designed with ports hydraulic or air tubing so that the machine can be fitted with robotics to incorporate into a production automation system.
Hwacheon’s software components assist the machine for increased efficiency.For example, HTDC, short for Hwacheon Thermal Displacement Control system,helps the machine maintain precision by controlling heat generated after prolonged operation.The slide covers wrap the machine vertically along with an effective cooling system to control thermal distortion and remove chips quickly
|Spindle Gauge Plane to Table Top||5.91″ – 28.35″|
|Dimensions||33.46″ x 19.69″|
|Max Load||661 lbs each side|
|T-Slots||3 x 0.71″ x 5.91″ each side|
|Spindle Speed||10,000 RPM|
|Spindle Power||20 HP|
|Rapid Speed (X/Y/Z)||1,575/1,575/1,575 ipm|
|Max. Tool Diameter||∅3.54″ / ∅5.94″|
|Max. Tool Length||11.81″|
|Air Pressure||5 CFM|
|Power Consumption||50 KVA|
|Machine Weight||16,535 lbs|
|Operating Dimensions||156.69″ x 84.06″ x 105.12-113.58″|