Vertical Machining Center – 5-Axis High Efficiency
The Mikron MILL E 700 U is a 5-Axis efficiency machine in a stiff and stabile C-frame construction made out of cast iron. With its large-sized guideways and the double-supported rotary table, this machine delivers quality on parts and an optimum chip removal rate for best efficiency. The Mikron MILL E U range is the right solution for job shops and parts producers in the automotive, energy and power generation, and general machinery markets.
The Mikron MILL E U range is the successor to the MIKRON HEM U range. It brings wider machining capacity and better machining performances onto a more robust machine base. With the large swivel range from -120° + 60° and the ability to load heavy parts up to 300kg onto the tilting swiveling table, the machine in this range allow users to manufacture a wider range of parts and tools than any other machine currently on the market. It is based on a stiff and stable C-frame construction made out of cast iron. Thanks to its large guideways, double side-supported rotary table and an optimum chip removal rate, this machine delivers quality on parts and reliable operations. The Mikron MILL E U range is the right solution for job shops and part producers facing many different requirements coming from the automotive, energy and power generation, and general mechanic industries.
The high-performance Spindles on the Mikron MILL E 500 U / 700 U series are designed to do heavy roughing and Milling to best surface finish all at once. With a bearing design with three preloaded hybrid ball bearings in the front and a thermally robust hybrid cylindrical roller bearing on the back, you are guaranteed a super-rigid rotating system that enables Milling with extra-long tools reaching into deep cavities. Ramp up your chip removal, thanks the feed rates made possible by this solution’s absorption of high Milling forces at the tool tip.
|Travel X, Y, Z||27.559″ x 23.622″ x 19.685″|
|Swiveling Axis Tilting Axis||-65/+120/nx360º|
|Feed Rate / Rapid Traverse X, Y, Z||30 m / min|
|Feed Rate / Rapid Traverse (Swiveling, rotating)||17/28 – 32/112 RPM|
|Tool Magazine||DT 30 / CT 60|
|Automation Pallet Size Number mm piece||UPC (320×320)/7 or Dynafix (350×350)/7
MTS or Delphine (400×400)/5 mm / piece
|Automation – Max. Load (Including Pallet)||992.07 lbs|
|Control Unit – Heidenhain/Fanuc||iTNC 530 HSCI FS / 0i-MD|