Toyoda FH1600SW-i Quill Spindle
Horizontal Machining Center – High Performance, High Speed, Quill Spindle
Quill Spindle, Heavy Duty Horizontal Machining Center, FH-SW Series
Toyoda’s FH1600SW-i horizontal machining center features the largest work envelope in its class with a maximum swing of ⌀126″ (⌀3,200 mm) and a workpiece height of 83″ (2,100 mm). Engineered for heavy cutting, the FH1600SW-i’s 5.9″ (150 mm) diameter quill spindle allows for powerful cutting with high material removal rates.
Main Specs:
- Travel: 118.1″ x 74.8″ x 82.6″ x 29.5″
- Pallet Size: 63.0″ x 49.2″
- Spindle Options: 74 HP 4,000 RPM
- Tool Capacity: 120 Standard CAT50
- Machine Weight: 165,000 lbs
Features
- FANUC 31iMA CNC Machine Control
- 74 HP, 4,000 RPM Spindle with 1,560ft-lbs of Torque
- 5.9” Spindle Quill with 29.5” of W-Axis Stroke
- FCD600 Cast Iron Base and Column for unsurpassed Vibration Dampening
- Side by Side Style Pallet Changer with Operator Platform
- Dual Z-Axis, Y-Axis, and W-Axis Ball Screws to Support Heavy Cutting Conditions
- Six Spindle Carriage Guide Trucks Provide unsurpassed Cutting Support
- Machine Weight of 165,000lbs Engineered with FEM Analysis to Reduce Vibration
- Full NC table (360,000 positions)
- Coolant-Thru-Spindle System: 300 PSI
- Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.
- Automatic Way Lube System
- 12 Months Parts and Labor Warranty (24 months Control and Drives)
Toyoda FH1600SW-i Machine Specifications
| Travel | |
| X-Axis | 118.1″ |
| Y-Axis | 74.8″ |
| Z-Axis | 82.6″ |
| W-Axis | 29.5″ |
| Table | |
| Pallet Size | 63.0″ x 49.2″ |
| Max Load | 17,600 lbs |
| NC Table (4th Axis) | 360,000 Positions |
| Spindle | |
| Spindle Type | Gear |
| Spindle Motor & Speed (HP – RPM) | 74 -4,000 RPM |
| Coolant Thru Spindle | 300 PSI |
| Spindle Taper | CAT50 |
| Feed Rate | |
| Rapid Traverse (X/Y/Z) | 1,378/1,575/1,575 ipm |
| Rapid Traverse (W) | 787 ipm |
| ATC | |
| Capacity | 120 Tools |
| Max. Tool Diameter | 4.9″ |
| Max. Tool Length | 31.5″ |
| Chip to Chip ATC Time | 23.0 seconds |
| Requirements | |
| Air Pressure | 5 CFM 56-70 PSI |
| Power Consumption | 104 KVA |
| Machine Net Weight | 165,000 lbs |
| Operating Dimensions | 397″ x 574″ |
