Toyoda FH500J
Horizontal Machining Center – High Performance, High Speed
High Performance, High Speed Horizontal Machining Center, FH-J Series
The FH500J and FH500J-50 are compact, high-speed horizontal machining centers featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).
All FH500J models (#40 & #50) taper are now equipped with a Direct Drive B Axis Table, featuring an index time (90 degrees) of 0.5 seconds and 360,000 degree positioning.
Main Specs:
- Travel: 28.74″ x 28.74″ x 33.46″
- Pallet Size: 19.68″ x 19.68″
- Spindle: 15,000 RPM, 123 ft/lbs
- Tool Capacity: 40 Standard (60, 119 options) CAT40 or CAT50
- Machine Weight: 29,700 lbs
Features
- FANUC 31MA CNC Machine Control
- FCD450 Cast Iron Base and Column for unsurpassed Vibration Dampening
- Solid-Core Ball Screws with Active Thermal Compensation Software
- Three Point Machine Leveling for Long Lasting Machine Geometry
- Designed with a Full Four Front Bearing Spindle Bearing Configuration
- Variable Hydraulic Preload Spindle Technology for Increased Spindle Stability
- Machine Weight of 29,700lbs Engineered with FEM Analysis to Reduce Vibration
- Toyoda J-Series Machines are Equipped with Patented Removable Spindle Taper Technology
- Full NC table (360,000 positions)
- Coolant Through the Spindle 435 PSI
- Easy Machine Installation Process with Pre-Pinned Integrated Coolant Tank
- Center Through Chip Removal Designed for Highly Efficient Chip Management
- Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.
- Automatic Way Lube System
- 12 Months Parts and Labor Warranty (24 months Control and Drives)
Toyoda FH500J Machine Specifications
Travel |
|
X-Axis |
28.74″ |
Y-Axis |
28.74″ |
Z-Axis |
33.46″ |
Max. Workpiece Swing |
∅ 31.5″ x 39.4″ |
Table |
|
Dimensions |
19.68″ x 19.68″ |
Max Load |
1,540 lbs |
NC Table (4th Axis) |
360,000 Positions |
|
|
Spindle |
|
Spindle Type |
Direct Drive |
Spindle Speed |
15,000 RPM |
Spindle Torque |
123 ft/lbs |
Spindle Motor |
30 HP |
Coolant Thru Spindle |
435 PSI |
Spindle Taper |
CAT40 or CAT50 |
Feed Rate |
|
Rapid Traverse (X/Y/Z) |
2,362 ipm |
|
|
ATC |
|
Capacity |
40 Tools (60, 119 options) |
Max. Tool Diameter |
2.75″ |
Max. Tool Length |
15.7″ |
Tool to Tool ATC Time |
0.9 seconds |
Requirements |
|
Air Pressure |
5 CFM 56-70 PSI |
Power Consumption |
51 KVA |
Machine Net Weight |
29,700 lbs |
Operating Dimensions |
91.73″ x 178.35″ |