Toyoda FH630SX-i
Horizontal Machining Center – High Performance, High Speed
High Performance, High Speed Horizontal Machining Center, FH-SX Series
The FH630SX-i is a powerful, high-speed horizontal machining center featuring an 8,000 RPM spindle, with the option of a 15,000 RPM high-torque spindle, and a rapid feedrate of 2,362 ipm (60 m/min). This machine has dual ballscrew drive on the Y and Z axes, and a Meehanite cast iron base for improved rigidity.
Main Specs:
- Travel: 29.52″ x 31.5″ x 33.45″
- Pallet Size: 21.65″ x 21.65″
- Spindle Options: 30 HP 15,000 RPM, 50 HP 8,000 RPM, 50 HP 15,000 RPM
- Tool Capacity: 60 Standard (121 option) CAT50
- Machine Weight: 41,000 lbs
Features
- FANUC 31iMA CNC Machine Control
- FCD600 Cast Iron Base and Column for unsurpassed Vibration Dampening
- Solid-Core Double Lead Ball Screws with Active Thermal Compensation
- Dual Z-Axis and Y-Axis Ball Screws to Support Heavy Cutting Conditions
- Three Point Machine Leveling for Long Lasting Machine Geometry
- Six Spindle Carriage Guide Trucks Provide unsurpassed Cutting Support
- Industry Best 2” Z Axis Dead Band Allows for Tool Length Reduction
- Machine Weight of 43,200lbs Engineered with FEM Analysis to Reduce Vibration
- Robust Full Contact Table Clamping Plate with Dual Cylinder Actuation
- 55mm Wide Roller Guides and 50mm Diameter Dual Lead X-Axis Ball Screw
- Full NC table (360,000 positions)
- Center Through Chip Removal Designed for Highly Efficient Chip Management
- Coolant-Thru-Spindle System: 300 PSI
- Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.
- Automatic Way Lube System
- 12 Months Parts and Labor Warranty (24 months Control and Drives)
Toyoda FH630SX-i Machine Specifications
| Travel | |
| X-Axis | 41.34″ |
| Y-Axis | 35.43″ |
| Z-Axis | 41.34″ |
| Max. Workpiece Swing | ∅ 46.06″ x 49.21″ |
| Table | |
| Pallet Size | 24.80″ x 24.80″ |
| Max Load | 3,300 lbs |
| NC Table (4th Axis) | 360,000 Positions |
| Spindle | |
| Spindle Type | Belt/Direct Drive/Gear |
| Spindle Speed | 15,000 RPM / 6,000 RPM |
| Spindle Motor | 30 / 50 HP |
| Coolant Thru Spindle | 300 PSI |
| Spindle Taper | CAT50 |
| Feed Rate | |
| Rapid Traverse (X/Y/Z) | 2,362 ipm |
| ATC | |
| Capacity | 60 Tools (121, 200 options) |
| Max. Tool Diameter | 11.81″ Cyl. / 12.59″ Boring |
| Max. Tool Length | 23.6″ |
| Chip to Chip ATC Time | 3.7 / 4.0 / 5.0 seconds |
| Requirements | |
| Air Pressure | 5 CFM 56-70 PSI |
| Power Consumption | 52 KVA |
| Machine Net Weight | 43,120 lbs |
| Operating Dimensions | 141.7″ x 271.6″ |
